LM2902N vs LM2902NG Vergleich
Detaillierter Direktvergleich von LM2902N von Texas Instruments und LM2902NG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM2902N | LM2902NG |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Operational Amplifiers | 4 | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Amplifier Type | Quad general-purpose operational amplifier | 4-circuit general-purpose operational amplifier |
| Architecture | Independent, high-gain, internally frequency-compensated | — |
| Supply Operation | Single-supply operation | — |
| Package Type | 14-pin DIP | — |
| Package Family | DIP-14 | — |
| Montageart | Through-hole | Through-hole |
| Ausgangstyp | [DATA_NEEDED: output architecture] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 7 mV typical |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | [DATA_NEEDED: output voltage swing] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | unknown | Unknown |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Lead-Free Status | unknown | — |
| Number of Channels | — | 4 channels |
| Output Current | — | 40 mA |
| Common-Mode Rejection Ratio | — | 50 dB minimum |
| Input Architecture | — | True differential inputs |
| Power Supply Configuration | — | Single supply |
| Gehäuse | — | 14-PDIP, 14 pins |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Resistance | — | [DATA_NEEDED: input resistance] |
| Output Resistance | — | [DATA_NEEDED: output resistance] |