LM2903AVQDRQ1 vs LM2903D Vergleich
Detaillierter Direktvergleich von LM2903AVQDRQ1 von Texas Instruments und LM2903D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM2903AVQDRQ1 - 36V AEC-Q100 Dual Open-Collector Comparator | Texas Instruments
LM2903AVQDRQ1 ✓ AktivSpezifikationsvergleich
| Parameter | LM2903AVQDRQ1 | LM2903D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | Differential, general purpose | Dual differential comparator |
| Number of Channels | 2 | 2 channels |
| Ausgangstyp | Open-Collector / Open-Drain, Rail-to-Rail | Open-collector |
| Supply Voltage Range, Single | 2 V to 36 V | — |
| Supply Voltage Range, Dual | +/-1 V to +/-18 V | — |
| Input Common-Mode Range | Rail-to-Rail | — |
| Versorgungsstrom | 0.4 mA per channel (distributor specification listing) | — |
| Propagation Delay | 1.3 us | 300 ns response time |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Differential Input Voltage Range | [DATA_NEEDED: maximum differential input voltage] | — |
| Betriebstemperaturbereich | -40 C to +125 C | -40 °C to +125 °C |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | [DATA_NEEDED: AEC-Q100 qualification status] |
| ESD Qualification Test | MIL-STD-883, Method 3015 | — |
| Gehäuse | 8-SOIC (D), 0.154 in (3.90 mm) body width | 8-pin SOIC |
| Anzahl der Pins | 8 | — |
| Montageart | Surface Mount | Surface mount |
| Supply Voltage Independent Supply Current | Yes, low supply-current drain independent of supply voltage | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS status] |
| Lead Finish | [DATA_NEEDED: lead finish / lead-free status] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Response Time | — | 300 ns |
| Supply Configuration | — | Single supply or split supply |
| Channel Independence | — | Two independent comparator channels |
| Output Logic Style | — | Open-collector, pull-up resistor required |
| Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Ruhestrom | — | [DATA_NEEDED: supply current per channel] |
| Output High Voltage | — | [DATA_NEEDED: output high-level voltage with pull-up] |