LM2903DG vs LM2903DR Vergleich
Detaillierter Direktvergleich von LM2903DG von onsemi und LM2903DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM2903DR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM2903DR ✓ AktivSpezifikationsvergleich
| Parameter | LM2903DG | LM2903DR |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Channels | 2 (dual independent comparators) | 2 channels |
| Comparator Type | General purpose, differential | Dual differential comparator |
| Ausgangstyp | Open-collector, rail-to-rail output swing | Open-collector |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage (Typ) | 2 mV | — |
| Response Time / Propagation Delay | 1.3 us (typical) | — |
| Supply Current per Comparator | 0.4 mA (typical, largely independent of VCC) | — |
| Common-Mode Input Range | Includes ground (negative rail) in single-supply operation | — |
| Maximum Supply Voltage Rating | 36 V (V-suffix devices tested to 32 V) | — |
| Minimum VCC Above Common-Mode | 1.5 V | — |
| Betriebstemperaturbereich | -40C to +105C | -40 °C to +125 °C |
| Gehäuse | SOIC-8 (D suffix), 8 pins | 8-pin SOIC |
| Montageart | Surface Mount | Surface mount |
| Description Category | Low Offset Voltage Dual Comparators | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Response Time | — | 300 ns |
| Supply Configuration | — | Single supply or split supply |
| Channel Independence | — | Two independent comparator channels |
| Output Logic Style | — | Open-collector, pull-up resistor required |
| Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Ruhestrom | — | [DATA_NEEDED: supply current per channel] |
| Propagation Delay | — | 300 ns response time |
| Output High Voltage | — | [DATA_NEEDED: output high-level voltage with pull-up] |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |