LM2904D vs LM2904DT Vergleich
Detaillierter Direktvergleich von LM2904D von Texas Instruments und LM2904DT von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM2904D - Dual 26V 700kHz Op Amp | Texas Instruments (Tape & Reel)
LM2904D ✓ AktivSTMicroelectronics
LM2904DT - Dual 1.1MHz General Purpose Op Amp | STMicroelectronics | SOIC-8
LM2904DT ✓ AktivSpezifikationsvergleich
| Parameter | LM2904D | LM2904DT |
|---|---|---|
| Marke | Texas Instruments | STMicroelectronics |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Channels | 2 | 2 |
| Supply Voltage (Single) | 3 V to 26 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±13 V | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/us | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 2 mV (typical) | [DATA_NEEDED: input offset voltage] |
| Quiescent Current (per amplifier) | 500 uA (typical) | — |
| Total Supply Current | 0.7 mA (typical) | — |
| Common-Mode Input Range | Includes ground | — |
| Output Stage | Class AB | — |
| Input Stage Latch-Up | Latch-up free | — |
| Short-Circuit Protection | Internal | — |
| Betriebstemperatur | -40C to +125C | — |
| Gehäuse | 8-SOIC (D) | SOIC-8 (8-SOIC / SOP-8) |
| Montageart | Surface Mount | Surface Mount |
| Amplifier Type | General Purpose | Standard (General Purpose) |
| Number of Amplifiers | — | 2 |
| Ausgangstyp | — | Single-Ended |
| Gain | — | High gain, internally frequency-compensated |
| Gain-Bandwidth Product | — | 1.1 MHz |
| Operating Voltage (listing designation) | — | 15 V |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage rating] |
| Supply Type | — | Single supply |
| Power Supply Drain | — | Low, independent of output voltage swing magnitude |
| Frequency Compensation | — | Internal (no external compensation network) |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current capability] |
| Pin-Anzahl | — | 8 |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Target Applications | — | Automotive and industrial control systems |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |