LM2904DT vs LM2904PWR Vergleich
Detaillierter Direktvergleich von LM2904DT von STMicroelectronics und LM2904PWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
LM2904DT - Dual 1.1MHz General Purpose Op Amp | STMicroelectronics | SOIC-8
LM2904DT ✓ AktivTexas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ AktivSpezifikationsvergleich
| Parameter | LM2904DT | LM2904PWR |
|---|---|---|
| Marke | STMicroelectronics | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Amplifiers | 2 | 2 circuits |
| Number of Channels | 2 | — |
| Amplifier Type | Standard (General Purpose) | — |
| Ausgangstyp | Single-Ended | — |
| Gain | High gain, internally frequency-compensated | — |
| Gain-Bandwidth Product | 1.1 MHz | 700 kHz |
| Operating Voltage (listing designation) | 15 V | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage rating] | 26 V |
| Supply Type | Single supply | — |
| Power Supply Drain | Low, independent of output voltage swing magnitude | — |
| Frequency Compensation | Internal (no external compensation network) | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Output Current | [DATA_NEEDED: output current capability] | — |
| Gehäuse | SOIC-8 (8-SOIC / SOP-8) | 8-TSSOP, 4.40 mm width |
| Pin-Anzahl | 8 | — |
| Montageart | Surface Mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Target Applications | Automotive and industrial control systems | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual general-purpose operational amplifier |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Common-Mode Input Range | — | Includes ground |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |