LM2904PW vs LM339DRE4 Vergleich
Detaillierter Direktvergleich von LM2904PW von Texas Instruments und LM339DRE4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM2904PW | LM339DRE4 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Logic ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Amplifiers | 2 circuits | — |
| Product Type | Dual general-purpose operational amplifier | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 700 kHz | — |
| Typical Supply Current | 0.7 mA | — |
| Supply-Current Independence | Independent of supply voltage | — |
| Supported Supply Configurations | Single supply or split supply | — |
| Common-Mode Input Range | Includes ground | — |
| Architecture | Voltage feedback, internally frequency compensated | — |
| Gehäuse | 8-TSSOP, 4.40 mm width | 14-pin SOIC |
| Package Length | 4.40 mm | — |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 0.37 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | 3.5 nA |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Comparator Type | — | Quad differential comparator |
| Number of Channels | — | 4 channels |
| Supply Voltage Range | — | 2 V to 36 V |
| Maximum Supply Rating | — | 38 V |
| Tested Supply Voltage | — | 30 V |
| Ausgangstyp | — | Open-collector |
| Input Offset Voltage Maximum | — | 9 mV |
| Versorgungsstrom | — | 200 µA per comparator |
| Response Time | — | 300 ns |
| Common-Mode Input Upper Limit | — | VCC - 1.5 V |
| Negative Input Swing Limit | — | -0.3 V below negative supply |
| ESD Rating HBM | — | 2 kV |
| Operating Temperature Grade | — | 0 °C to 70 °C |