LM2904PWR vs LM2904DT Vergleich
Detaillierter Direktvergleich von LM2904PWR von Texas Instruments und LM2904DT von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ AktivSTMicroelectronics
LM2904DT - Dual 1.1MHz General Purpose Op Amp | STMicroelectronics | SOIC-8
LM2904DT ✓ AktivSpezifikationsvergleich
| Parameter | LM2904PWR | LM2904DT |
|---|---|---|
| Marke | Texas Instruments | STMicroelectronics |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Amplifiers | 2 circuits | 2 |
| Product Type | Dual general-purpose operational amplifier | — |
| Maximum Supply Voltage | 26 V | [DATA_NEEDED: maximum supply voltage rating] |
| Gain-Bandwidth Product | 700 kHz | 1.1 MHz |
| Typical Supply Current | 0.7 mA | — |
| Supply-Current Independence | Independent of supply voltage | — |
| Supported Supply Configurations | Single supply or split supply | — |
| Common-Mode Input Range | Includes ground | — |
| Architecture | Voltage feedback, internally frequency compensated | — |
| Gehäuse | 8-TSSOP, 4.40 mm width | SOIC-8 (8-SOIC / SOP-8) |
| Package Length | 4.40 mm | — |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Channels | — | 2 |
| Amplifier Type | — | Standard (General Purpose) |
| Ausgangstyp | — | Single-Ended |
| Gain | — | High gain, internally frequency-compensated |
| Operating Voltage (listing designation) | — | 15 V |
| Supply Type | — | Single supply |
| Power Supply Drain | — | Low, independent of output voltage swing magnitude |
| Frequency Compensation | — | Internal (no external compensation network) |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Current | — | [DATA_NEEDED: output current capability] |
| Pin-Anzahl | — | 8 |
| Target Applications | — | Automotive and industrial control systems |