LM293N vs LM2904N Vergleich
Detaillierter Direktvergleich von LM293N von STMicroelectronics und LM2904N von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
LM293N - Dual Open-Collector Comparator, 8-DIP | STMicroelectronics
LM293N UnknownSpezifikationsvergleich
| Parameter | LM293N | LM2904N |
|---|---|---|
| Marke | STMicroelectronics | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Unknown | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,11 |
| Comparator Configuration | Dual independent comparator | — |
| Number of Channels | 2 channels | — |
| Ausgangstyp | Open-collector | Push-pull |
| Supply Configuration | Single supply or split power supplies | Single supply or split supply |
| Input Function | Differential voltage comparison | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | Extending to ground/VEE |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Response Time | [DATA_NEEDED: propagation delay] | — |
| Ruhestrom | [DATA_NEEDED: supply current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-DIP | 8-pin PDIP |
| Montageart | Through-hole | Through-hole |
| Logic Compatibility | External pull-up required for open-collector output | — |
| RoHS-Status | unknown | unknown |
| REACH Status | unknown | unknown |
| Amplifier Count | — | 2 amplifiers |
| Product Family Supply Designation | — | 26 V |
| Gain-Bandwidth Product | — | 1 MHz |
| Topologie | — | Dual independent operational amplifiers |
| Compensation | — | Internally frequency compensated |
| Power Drain | — | Low; numeric value [DATA_NEEDED: power drain] |
| Input Type | — | Differential |
| Product Classification | — | Standard general-purpose amplifier |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| AEC-Q100 Qualification | — | not_applicable |