LM324AN vs LT1014DN Vergleich
Detaillierter Direktvergleich von LM324AN von Texas Instruments und LT1014DN von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM324AN | LT1014DN |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | General-purpose operational amplifier | Precision Operational Amplifier |
| Number of Amplifiers | 4 circuits | — |
| Number of Independent Outputs | 4 outputs | — |
| Maximum Supply Voltage | 30 V | — |
| Gain-Bandwidth Product | 1.2 MHz | — |
| Input Offset Voltage | 3 mV | — |
| Compensation | Internally frequency-compensated | — |
| Supply Configuration | Single or dual supply | — |
| Betriebstemperaturbereich | 0°C to +70°C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 14-pin PDIP | — |
| Montageart | Through-hole | Through-Hole |
| Anzahl der Pins | 14 pins | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Supply Current per Amplifier | [DATA_NEEDED: supply current per amplifier] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Channels | — | 4 (Quad) |
| Supply Voltage Range (Single) | — | 5 V to 44 V |
| Supply Voltage Range (Dual) | — | ±2.5 V to ±22 V |
| Input Offset Voltage (Max) | — | 50 µV |
| Offset Voltage Drift (Max) | — | 0.3 µV/°C |
| Input Offset Current (Max) | — | 0.15 nA |
| Open-Loop Gain (Typical) | — | 8,000,000 (8 million) |
| CMRR (Min) | — | 117 dB |
| PSRR (Min) | — | 120 dB |
| Supply Current per Amplifier (Max) | — | 500 µA |
| Low-Frequency Noise (0.1 Hz to 10 Hz) | — | 0.55 µV P-P |
| Package Type | — | 14-pin PDIP (N) |
| RoHS-Status | — | Compliant |
| Lead-Free | — | Yes |