LM324DRG3 vs LM324D Vergleich
Detaillierter Direktvergleich von LM324DRG3 von Texas Instruments und LM324D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ AktivSpezifikationsvergleich
| Parameter | LM324DRG3 | LM324D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Amplifier Circuits | 4 circuits | — |
| Amplifier Type | General-purpose operational amplifier | Quad general-purpose operational amplifier |
| Gain-Bandwidth Product | 1.2 MHz | — |
| Slew Rate | 0.5 V/µs | [DATA_NEEDED: slew rate] |
| Supply Current Drain | 0.8 mA typical | — |
| Supply Configuration | Single supply or split supply | Single supply or split supply |
| Channel Independence | 4 independent amplifiers | — |
| Frequency Compensation | Internally frequency-compensated | Internal |
| Gehäuse | 14-SOIC, 0.154 inch / 3.90 mm width | 14-pin SOIC |
| Package Type | Cut Tape (CT) | — |
| Montageart | 14-pin surface-mount SOIC | Surface mount |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage for LM324DRG3] | Plus or minus 2 mV maximum for BA versions at 25 C |
| Input Bias Current | [DATA_NEEDED: input bias current for LM324DRG3] | [DATA_NEEDED: input bias current] |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | RoHS-compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Status | Lead-free | — |
| Number of Amplifiers | — | 4 |
| Architecture | — | Four independent high-gain frequency-compensated operational amplifiers |
| Supply Voltage Range | — | 3 V to 36 V for B versions |
| ESD Protection | — | 2 kV HBM for B, BA, and K versions |
| Input Filtering | — | Internal RF and EMI filter for B and BA versions |
| Device Type | — | Low-power operational amplifier |
| Input Type | — | Differential input |
| Ausgangstyp | — | Single-ended output |
| Operating Class | — | Standard general purpose |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output swing] |