LM339DTBR2G vs LM339PW Vergleich
Detaillierter Direktvergleich von LM339DTBR2G von onsemi und LM339PW von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM339PW - 4-Channel 36V Open-Collector Comparator | Texas Instruments
LM339PW ✓ AktivSpezifikationsvergleich
| Parameter | LM339DTBR2G | LM339PW |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | Quad differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | 2 V to 36 V |
| Supply Configuration | Single supply | — |
| Ausgangstyp | Open collector | Open-collector |
| Logic Compatibility | CMOS and TTL compatible | — |
| Operating Temperature Grade | Commercial temperature grade | — |
| Gehäuse | 14-pin TSSOP | 14-pin TSSOP |
| Montageart | Surface mount | Surface mount |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Output Pull-Up Requirement | [DATA_NEEDED: external pull-up resistor requirements] | — |
| Versorgungsstrom | [DATA_NEEDED: quiescent supply current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Response Time | [DATA_NEEDED: comparator response time] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Maximum Family Rating | — | Up to 38 V |
| Propagation Delay | — | 300 ns |
| Family Response Time | — | 1 µs |
| Low Input Offset | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| Supply Current per Comparator | — | 200 µA typical |
| Common-Mode Input Range | — | Includes ground |
| Differential Input Voltage | — | Equal to maximum-rated supply voltage, up to ±38 V |
| ESD Rating HBM | — | 2 kV |
| Output Compatibility | — | Compatible with TTL, MOS, and CMOS |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |