LM358AN vs LM2904P3 Vergleich
Detaillierter Direktvergleich von LM358AN von Texas Instruments und LM2904P3 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM358AN - Dual 1MHz Op Amp, 3-36V Single Supply | Texas Instruments
LM358AN ✓ AktivSpezifikationsvergleich
| Parameter | LM358AN | LM2904P3 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Amplifiers | 2 (independent channels) | — |
| Amplifier Type | General-purpose, internally frequency-compensated, single-supply operational amplifier | General-purpose operational amplifier |
| Supply Voltage Range (single supply) | 3 V to 36 V | — |
| Maximum Total Supply Voltage | 36 V | — |
| Input Common-Mode Voltage Range | 0 V to (V+ minus 1.5 V) | — |
| Open-Loop Gain | 100 dB minimum | — |
| Gain-Bandwidth Product | 1.0 MHz | 700 kHz |
| Slew Rate | 0.3 V/us | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 2 mV typical, 3 mV maximum | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 20 nA typical | [DATA_NEEDED: input bias current] |
| Input Offset Current | 2 nA typical | — |
| Output Current | 40 mA typical source, 20 mA typical sink | — |
| Output Voltage Swing | Approximately 20 mV from each rail into 2 kOhm load | [DATA_NEEDED: output voltage swing] |
| Betriebstemperaturbereich | 0 C to +70 C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | PDIP-8, 8-pin plastic dual in-line (through-hole) | 8-PDIP |
| Lead-Free Status | Lead-free (A suffix), RoHS compliant | — |
| Montageart | Through-hole | Through-hole |
| Number of Outputs per IC | 2 | — |
| Current Supply (Typ) | [DATA_NEEDED: total supply current typical] | — |
| Number of Channels | — | 2 circuits |
| Maximum Supply Voltage | — | 26 V |
| Product Type | — | Operational amplifier |
| Voltage Feedback Architecture | — | Operational amplifier |
| Number of Amplifiers per Package | — | 2 |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |