LM358APW vs LM2904PW Vergleich
Detaillierter Direktvergleich von LM358APW von Texas Instruments und LM2904PW von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM358APW | LM2904PW |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Configuration | Dual (2 independent circuits) | — |
| Supply Voltage Rating | 30 V | — |
| Gain Bandwidth Product | 700 kHz | — |
| Supply Current (per amplifier, typ) | 0.7 mA | — |
| Common-Mode Input Voltage Range | Includes ground (negative rail) | — |
| Number of Channels | 2 | — |
| Amplifier Type | General Purpose / Standard | — |
| Compensation | Internally compensated (unity-gain stable) | — |
| Gehäuse | 8-TSSOP (PW) | 8-TSSOP, 4.40 mm width |
| Montageart | Surface Mount | Surface mount |
| Input Offset Voltage (A grade) | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Moisture Sensitivity Level | [DATA_NEEDED: MSL level] | — |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Common-Mode Input Range | — | Includes ground |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |