LM358N vs LM2904ANG Vergleich
Detaillierter Direktvergleich von LM358N von Texas Instruments und LM2904ANG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM358N | LM2904ANG |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Product Type | Dual operational amplifier | — |
| Number of Amplifiers | 2 independent amplifiers | — |
| Maximum Supply Voltage | 32 V | — |
| Typical Gain-Bandwidth Product | 1 MHz | — |
| Input Type | Differential input | — |
| Frequency Compensation | Internally frequency compensated | — |
| Supply Configuration | Single supply operation emphasized in the verified LM358 family description | — |
| Gehäuse | 8-pin mini-DIP or 8-pin PDIP, depending on manufacturer source | 8-PDIP, 0.300 inch pitch (7.62 mm) |
| Montageart | Through-hole | Through-hole |
| Anzahl der Pins | 8 pins | 8 pins |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.6 V/µs |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | Extends to ground/VEE |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Noise | [DATA_NEEDED: noise voltage or noise density] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Standardized Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Amplifier Circuits | — | 2 circuits |
| Amplifier Type | — | General-purpose operational amplifier |
| Supply Type | — | Single or split supply |
| Gain-Bandwidth Product | — | 1 MHz |
| Power Drain | — | Low |
| Packaging Type | — | Tube |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Output Current | — | [DATA_NEEDED: output current] |