LM393DT vs LM393DR2GH Vergleich
Detaillierter Direktvergleich von LM393DT von STMicroelectronics und LM393DR2GH von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM393DT | LM393DR2GH |
|---|---|---|
| Marke | STMicroelectronics | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Stückpreis (USD) | $0,05 | — |
| Number of Channels | 2 | 2 channels |
| Supply Voltage - Single | 2 V to 36 V | — |
| Supply Voltage - Dual | ±1 V to ±18 V | — |
| Supply Current (per comparator) | 0.4 mA (typical) | — |
| Input Offset Voltage | 2 mV (typical) | 2.0 mV maximum |
| Input Bias Current | 25 nA (typical) | [DATA_NEEDED: input bias current] |
| Response Time | 1.3 µs (typical) | [DATA_NEEDED: comparator response time] |
| Ausgangstyp | Open Collector | Open collector |
| Output Sink Current | 16 mA (maximum) | [DATA_NEEDED: maximum output sink current] |
| Input Common-Mode Voltage Range | 0 V to VCC - 1.5 V | — |
| Betriebstemperaturbereich | -40°C to +105°C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | SOIC-8 | 8-pin SOIC |
| Montageart | Surface Mount | Surface mount |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance] |
| MSL-Level | 1 | — |
| Comparator Type | — | Dual independent precision voltage comparator |
| Supply Configuration | — | Single or split supply |
| Maximum Total Supply Voltage | — | 36 V |
| Common-Mode Input Range | — | To ground with single-supply operation |
| Output Compatibility | — | TTL, CMOS, and open-collector logic interfacing |
| Number of Inputs | — | 4 inputs total |
| Anzahl der Ausgänge | — | 2 outputs |
| Automotive Qualification | — | Consumer and automotive applications supported |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Supply Current per Channel | — | [DATA_NEEDED: typical and maximum supply current] |