LM393LVQDRQ1 vs LM393LVDR Vergleich
Detaillierter Direktvergleich von LM393LVQDRQ1 von Texas Instruments und LM393LVDR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM393LVQDRQ1 - Dual Open-Drain Comparator | Texas Instruments
LM393LVQDRQ1 ✓ AktivSpezifikationsvergleich
| Parameter | LM393LVQDRQ1 | LM393LVDR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | Dual, general-purpose voltage comparator | Dual general-purpose voltage comparator |
| Number of Channels | 2 channels | 2 channels |
| Supply Voltage Range | 1.65 V to 5.5 V | 1.65 V to 5.5 V |
| Ausgangstyp | Open-drain | Open drain |
| Input Offset Voltage | 5 mV maximum | — |
| Input Bias Current | 5 nA typical | — |
| Betriebstemperaturbereich | -40 °C to 125 °C | -40°C to +125°C |
| Gehäuse | 8-SOIC, 4.5 mm width | 8-pin SOIC (D) |
| Pin-Anzahl | 8 pins | 8 pins |
| Montageart | Surface mount | Surface mount |
| Automotive Qualification | Qualified automotive comparator | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Input Common-Mode Range | — | Rail-to-rail |
| Maximum Input Offset Voltage | — | 3000 uV |
| Maximum Supply Current | — | 0.1 mA |
| Response Time | — | 600 ns |
| Input Pin Count | — | 4 inputs across 2 channels |
| Output Pin Count | — | 2 open-drain outputs |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |