LPC845M301JHI33 vs MK20DN128VMP5 Vergleich
Detaillierter Direktvergleich von LPC845M301JHI33 von NXP Semiconductors und MK20DN128VMP5 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MK20DN128VMP5 - Kinetis K20 50MHz Cortex-M4 MCU, 128KB Flash | NXP
MK20DN128VMP5 ✓ AktivSpezifikationsvergleich
| Parameter | LPC845M301JHI33 | MK20DN128VMP5 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,84 | $5,20 |
| Core | Arm Cortex-M0+ (32-bit) | — |
| Maximum CPU Frequency | 30 MHz | — |
| Program Memory (Flash) | 64 KB (64K x 8) | — |
| SRAM | 16 KB | 16 KB |
| Gehäuse | 32-HVQFN (5x5 mm) | 64-MAPBGA (5x5 mm) |
| Montageart | Surface Mount | Surface Mount (MAPBGA) |
| Betriebstemperatur | -40 C to +105 C | — |
| Supply Voltage (VDD) | 1.8 V to 3.6 V | — |
| I/O Pins | Up to 28 GPIO | — |
| ADC | 12-bit, up to 12 channels | 16-bit SAR, multiple channels |
| DAC | 10-bit | — |
| Analog Comparators | 2 | — |
| I2C Interfaces | 4 (Fast-mode Plus) | — |
| USART | Up to 5 | — |
| SPI Interfaces | Up to 2 | — |
| Capacitive Touch (CAPT) | Yes | — |
| Timers | Multi-rate timer, SCTimer/PWM, self-wake-up timer, watchdog | — |
| CRC Engine | Yes | — |
| DMA Channels | Yes (per datasheet) | [DATA_NEEDED: DMA channel count] |
| Debug Interface | Serial Wire Debug (SWD) | — |
| RoHS-Status | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M4 with FPU |
| Core Bit Width | — | 32-bit |
| Maximale Taktfrequenz | — | 50 MHz |
| Program Flash Memory | — | 128 KB (128K x 8) |
| USB Controller | — | USB 2.0 Full-Speed Device/Host/OTG with on-chip transceiver |
| Versorgungsspannung | — | 1.8 V / 2.5 V / 3.3 V |
| Betriebstemperaturbereich | — | -40C to +105C (industrial) |
| Number of I/O Pins | — | [DATA_NEEDED: GPIO count] |
| Communication Interfaces | — | UART, SPI, I2C, USB |
| Low-Power Modes | — | Run, Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLSx |
| Series / Sub-Family | — | Kinetis K20 (K20 Sub-Family, 50 MHz) |
| MSL-Level | — | 3 (per JEDEC J-STD-020) |