LSF0108QPWRQ1 vs TXS0108EPWR Vergleich
Detaillierter Direktvergleich von LSF0108QPWRQ1 von Texas Instruments und TXS0108EPWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LSF0108QPWRQ1 | TXS0108EPWR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Logic ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,42 | $0,51 |
| Translator Type | Voltage Level Translator | Voltage Level Translator, Bidirectional, 1 Circuit, 8 Channel |
| Kanäle | 8 bidirectional | — |
| Circuits | 1 | — |
| Voltage - VCCA (VREF_A) | 0.95 V to 4.5 V | — |
| Voltage - VCCB (VREF_B) | 1.65 V to 5.5 V | — |
| Translation Range | 0.95 V to 5 V | — |
| Direction Control | None (automatic bidirectional) | Automatic direction sensing |
| Ausgangstyp | Open-drain and push-pull compatible | — |
| Up Translation Speed | 100 MHz (<=30 pF load) | — |
| Down Translation Speed | >100 MHz (<=30 pF load) | — |
| Speed at 50 pF Load | 40 MHz up/down | — |
| Betriebstemperatur | -40C to +125C | -40C to +85C |
| Qualification | AEC-Q100 automotive | — |
| Gehäuse | 20-TSSOP (PW) | TSSOP (PW), 20 pins |
| Montageart | Surface Mount | Surface Mount |
| Eigenschaften | Rise/fall time control via external pull-ups | — |
| RoHS-Status | Compliant | Compliant |
| Funktion | — | 8-bit bidirectional voltage-level translator |
| Signal Type | — | Open-drain and push-pull |
| VCCA Supply Range (A Port) | — | 1.2 V to 3.6 V |
| VCCB Supply Range (B Port) | — | 1.65 V to 5.5 V |
| Max Data Rate (Push-Pull) | — | 60 Mbps |
| Max Data Rate (Open-Drain) | — | 2 Mbps |
| Propagation Delay | — | 4.8 ns |
| Ruhestrom | — | 620 uA |
| VCC Isolation | — | Yes - outputs high impedance if either VCC at GND |
| MSL-Level | — | 1 (260C unlimited floor life) |
| OE Pin | — | Yes - output enable, three-state outputs |