LT1007CJ8 vs LT1037CJ8 Vergleich

Detaillierter Direktvergleich von LT1007CJ8 von Analog Devices und LT1037CJ8 von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Analog Devices
LT1007CJ8 LT1007CJ8 - Low-Noise Precision Op Amp | Analog Devices

LT1007CJ8 - Low-Noise Precision Op Amp | Analog Devices

LT1007CJ8 ✓ Aktiv

Spezifikationsvergleich

Parameter LT1007CJ8 LT1037CJ8
Marke Analog Devices Analog Devices
Kategorie Amplifier ICs Amplifier ICs
Lebenszyklusstatus Aktiv Aktiv
Amplifier Type Single operational amplifier Precision operational amplifier
Number of Circuits 1 circuit 1 circuit
Wideband Input Noise Density 2.5 nV/√Hz 2.5 nV/√Hz
Guaranteed 10 Hz Noise Density 4.5 nV/√Hz 4.5 nV/√Hz
Guaranteed 1 kHz Noise Density 3.8 nV/√Hz 3.8 nV/√Hz
0.1 Hz to 10 Hz Noise 60 nV peak-to-peak typical —
1/f Corner Frequency 2 Hz 2 Hz
Input Offset Voltage 10 µV —
Input Offset Drift 0.2 µV/°C —
Common-Mode Rejection Ratio 130 dB 130 dB
Power-Supply Rejection Ratio 130 dB 130 dB
LT1037 Gain-Bandwidth Product 60 MHz —
Minimum Stable Closed-Loop Gain 5 5
Minimum Voltage Gain 2 million typical —
Gehäuse 8-pin CERDIP 8-pin CERDIP, 0.300 inch (7.62 mm)
Montageart Through-hole Through-hole
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Slew Rate [DATA_NEEDED: slew rate] —
RoHS-Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Gain-Bandwidth Product — 60 MHz
0.1 Hz to 10 Hz Peak-to-Peak Noise — 60 nV peak-to-peak
Offset Voltage — 10 µV
Offset Voltage Drift — 0.2 µV/°C
Terminals — 8 terminals
Temperature Grade — Commercial
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern