LT1037CL vs LT1037CP Vergleich
Detaillierter Direktvergleich von LT1037CL von Texas Instruments und LT1037CP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LT1037CL | LT1037CP |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Unknown | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,00 |
| Product Type | Single operational amplifier | Low-noise, high-speed, precision operational amplifier |
| Amplifier Category | Instrumentation, op amp, buffer amp | — |
| Number of Circuits | 1 circuit | — |
| Gehäuse | TO-99-8 | 8-pin PDIP |
| Gain-Bandwidth Product | 60 MHz | 60 MHz |
| Wideband Input Noise | 2.5 nV/√Hz | — |
| 1/f Corner Frequency | 2 Hz | 2 Hz |
| 0.1 Hz to 10 Hz Peak-to-Peak Noise | 60 nV | — |
| Offset Voltage | 10 µV | — |
| Offset Voltage Drift | 0.2 µV/°C | — |
| Common-Mode Rejection | 130 dB | 130 dB |
| Power-Supply Rejection | 130 dB | 130 dB |
| Closed-Loop Stability | Stable for closed-loop gains of 5 or greater | — |
| Frequency Response | Up to 8 MHz | — |
| Input Offset Voltage Maximum | 110 µV | — |
| Montageart | Through-hole | Through-hole |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Amplifiers | — | 1 amplifier |
| Slew Rate | — | 11 V/µs minimum for LT1037 and LT1037A |
| Input Noise Density | — | 2.5 nV/√Hz wideband |
| Maximum Equivalent Input Noise Voltage | — | 3.8 nV/√Hz at 1 kHz |
| Low-Frequency Noise | — | 60 nV peak-to-peak from 0.1 Hz to 10 Hz |
| Input Offset Voltage | — | 10 µV |
| Input Offset Voltage Drift | — | 0.2 µV/°C |
| Typical Differential Voltage Gain | — | 20 V/µV at 25°C, 2 kΩ load, ±12 V |
| Differential Gain at 600 Ω Load | — | 12 V/µV at 25°C, ±10 V |
| Stable Closed-Loop Gain | — | 5 V/V or greater |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |