LT1167IS8 vs AD620BRZ Vergleich
Detaillierter Direktvergleich von LT1167IS8 von Analog Devices und AD620BRZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
LT1167IS8 - Precision InAmp, Single-Resistor Gain, SOIC-8 | Analog Devices
LT1167IS8 ✓ AktivSpezifikationsvergleich
| Parameter | LT1167IS8 | AD620BRZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Channels | 1 | 1 channel |
| Gain Range | 1 to 10,000 (single external resistor) | 1 to 10,000 |
| Input Voltage Noise Density | 7.5 nV/√Hz at 1 kHz | — |
| Maximum Offset Voltage | 60 µV | — |
| Slew Rate | 1.2 V/µs | [DATA_NEEDED: slew rate] |
| Gain-Bandwidth Product | 1 MHz | — |
| Supply Current (typical) | 0.9 mA | — |
| Supply Voltage Range | ±2.3 V to ±18 V | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Betriebstemperatur | -40 °C to +85 °C (industrial) | — |
| Gehäuse | 8-pin SOIC (SO-8) | 8-lead SOIC |
| ESD Protection (with 5 kΩ resistors) | IEC 1000-4-2 level 4 compliant | — |
| RoHS-Status | Compliant (PBF suffix) | [DATA_NEEDED: RoHS compliance status] |
| Montageart | Surface Mount | Surface mount |
| MSL-Level | [DATA_NEEDED: MSL level] | — |
| Device Type | — | Single-amplifier instrumentation amplifier |
| Gain-Setting Method | — | 1 external resistor |
| Maximum Supply Current | — | 1.3 mA |
| Maximum Supply Voltage | — | ±18 V |
| Supply Type | — | Single or dual supply |
| Differential Input | — | Instrumentation-amplifier differential input architecture |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Voltage Noise | — | [DATA_NEEDED: input voltage noise density] |
| Bandwidth | — | [DATA_NEEDED: bandwidth] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |