LT8364EMSE vs LT8364HMSE#PBF Vergleich
Detaillierter Direktvergleich von LT8364EMSE von Analog Devices und LT8364HMSE#PBF von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
LT8364EMSE - 60V 4A Boost/SEPIC/Inverting Converter | Analog Devices
LT8364EMSE ✓ AktivAnalog Devices
LT8364HMSE#PBF - 60V, 4A Boost/SEPIC/Inverting DC/DC Converter | ADI
LT8364HMSE#PBF ✓ AktivSpezifikationsvergleich
| Parameter | LT8364EMSE | LT8364HMSE#PBF |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | DC-DC Converters | DC-DC Converters |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,62 | $3,61 |
| Topologie | Boost, SEPIC, or Inverting (selectable via single FB pin) | Boost, SEPIC, Inverting |
| Eingangsspannungsbereich | 2.8 V to 60 V | 2.8 V to 60 V |
| Switch Voltage Rating | 60 V maximum | 60 V |
| Switch Current Rating | 4 A peak | 4 A peak |
| Ausgangsspannungsbereich | 1.6 V to 60 V (boost/SEPIC); negative in inverting | — |
| Quiescent Current (Burst Mode) | 9 uA typical | 9 µA |
| Output Ripple (Burst Mode) | 15 mV typical | — |
| Internal Oscillator Frequency | 2 MHz typical (RT programmable 200 kHz to 2 MHz) | — |
| Betriebs-Sperrschichttemperatur | -40 C to +125 C (E grade) / 0 C to +125 C (specified) | — |
| Gehäuse | 16-pin MSOP (12-lead) with Exposed Pad (MSE), 3.00 mm body width | 12-lead MSOP with exposed pad (MSE) |
| Montageart | Surface Mount | Surface Mount |
| EN/UVLO Pin | Yes (combined enable + accurate undervoltage lockout) | — |
| Control Architecture | Constant-frequency peak current mode | — |
| MSL-Level | 1 (per JEDEC J-STD-020, unlimited floor life) | 1 |
| RoHS-Status | Compliant | Compliant (Pb-free #PBF suffix) |
| Output Voltage Range (Boost/SEPIC) | — | 1.6 V to 60 V |
| Ausgangskonfiguration | — | Positive fixed (single output) |
| Schaltfrequenz | — | 1.4 MHz to 2 MHz (programmable via RT) |
| Default Switching Frequency | — | 2 MHz |
| Typical Output Ripple | — | < 15 mV |
| Control Mode | — | Current-mode |
| Feedback Pin | — | Single FB (positive or negative feedback) |
| Betriebs-Sperrschichttemperaturbereich | — | -40 °C to +150 °C (H grade) |
| Sanftanlauf | — | Internal |
| Thermisches Abschalten | — | Yes (internal) |