LT8614IUDC vs LT8606EDC#TRPBF Vergleich
Detaillierter Direktvergleich von LT8614IUDC von Analog Devices und LT8606EDC#TRPBF von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
LT8606EDC#TRPBF - 42V 350mA Sync Buck Regulator | Analog Devices
LT8606EDC#TRPBF ✓ AktivSpezifikationsvergleich
| Parameter | LT8614IUDC | LT8606EDC#TRPBF |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | DC-DC Converters | DC-DC Converters |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,68 | $2,52 |
| Topologie | Synchronous Buck (Step-Down) | Synchronous Step-Down (Buck) |
| Eingangsspannungsbereich | 3.4 V to 42 V | 3.0 V to 42 V |
| Ausgangsspannungsbereich | 0.97 V to 41.8 V (adjustable) | 1.8 V to VIN (adjustable, lower voltages possible per datasheet) |
| Maximaler Ausgangsstrom | 4 A | 350 mA continuous |
| Ruhestrom | 2.5 uA (Burst Mode, no load) | — |
| Schaltfrequenz | Up to 3 MHz (programmable, SYNC-capable) | 200 kHz to 2 MHz (2 MHz default, RT pin adjustable on MSOP variant) |
| Architecture | Silent Switcher with internal synchronous switches | — |
| Power-Good-Ausgang | Open-drain PG pin | — |
| Soft-Start / Tracking | Yes (TR/SS pin) | — |
| Synchronization | External clock input on SYNC pin (Burst Mode / pulse-skipping selectable) | — |
| Minimum On-Time | [DATA_NEEDED: minimum on-time] | — |
| Peak Efficiency | > 95% (typical, mid-load) | — |
| Betriebs-Sperrschichttemperatur | -40 C to +125 C (I grade) | — |
| Gehäuse | 20-pin QFN (3 mm x 4 mm), exposed pad | 8-pin 2 mm x 2 mm DFN with Exposed Pad (DDC) |
| Montageart | Surface Mount | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant (Pb-free #PBF suffix) | — |
| Enable-Pin | Yes (EN/UVLO) | — |
| Quiescent Current (non-switching) | — | 1.7 µA typical |
| Wirkungsgrad | — | >90% at moderate loads |
| Light-Load Mode | — | Low ripple Burst Mode |
| Betriebstemperaturbereich | — | -40 °C to +125 °C (junction) |
| Switch Type | — | Internal high-side and low-side MOSFETs (synchronous) |
| Operating Frequency Mode | — | Burst Mode (DFN); selectable Burst/SYNC/SS on MSOP variants |
| Maximum Junction Temperature | — | +125 °C |
| Storage Temperature Range | — | -65 °C to +150 °C |
| Feuchtigkeitsempfindlichkeitsgrad (MSL) | — | 1 (per JEDEC J-STD-020) |
| Lead Finish | — | Au (Gold) per Analog Devices package |
| RoHS / REACH | — | RoHS compliant (per DigiKey listing) |