LTC2313HTS8-14 vs LTC2309IF Vergleich
Detaillierter Direktvergleich von LTC2313HTS8-14 von Analog Devices und LTC2309IF von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
LTC2313HTS8-14 - 14-bit 2.5Msps SAR ADC in TSOT-23-8 | Analog Devices
LTC2313HTS8-14 ✓ Aktiv
Spezifikationsvergleich
| Parameter | LTC2313HTS8-14 | LTC2309IF |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,10 | $9,50 |
| Auflösung | 14 bits | 12 bit |
| Sample Rate | 2.5 Msps | — |
| Architecture | SAR (Successive Approximation Register) | SAR (Successive Approximation Register) |
| Number of Input Channels | 1 (single-ended/differential) | 8 single-ended / 4 differential |
| Versorgungsspannung | 3 V to 5 V (single supply, 5 V typical) | — |
| Versorgungsstrom | 5 mA at 2.5 Msps | 300 uA at 1 ksps (typical) |
| Input Type | Pseudo-differential (IN+, IN-) | — |
| Internal Reference | 2.5 V nominal, 20 ppm/°C max drift | 2.5 V, 10 ppm/C typical drift |
| Serial Interface | SPI-compatible SCK/SDO/SDI/CSF, supports 1.8 V/2.5 V/3 V/5 V logic | — |
| No-Missing-Codes Performance | 14 bits guaranteed | — |
| Latency | 0 conversion latency | — |
| Betriebstemperaturbereich | -40 °C to +125 °C (H-grade) | — |
| Gehäuse | TSOT-23-8 (HTS8) | 20-TSSOP (FE) |
| Montageart | Surface Mount | — |
| MSL-Level | 1 (per JEDEC J-STD-020) | — |
| RoHS-Status | Compliant | Compliant (PBF suffix) |
| Conversion Cycles | 16 SCK per conversion (14-bit plus 2 dummy bits) | — |
| Conversion Time | — | 1.3 us per channel (typical) |
| Throughput Rate | — | up to 500 ksps (datasheet-dependent) |
| Supply Voltage (VDD) | — | 5 V single supply |
| Digital Interface | — | I2C-compatible, standard / fast / high-speed modes |
| I2C Address Selection | — | 2 pins (AD0, AD1) - up to 4 devices on one bus |
| External Reference Input (REFIN) | — | Yes, supports ratiometric operation |
| Sample-and-Hold | — | Fully differential, common-mode noise rejection |
| Analog Input Range | — | 0 V to VDD (unipolar); +/-VREF differential |
| Operating Temperature Range (I grade) | — | -40 C to +85 C |
| Abschaltstrom | — | Nap / I2C power-down supported |