LTP5902IPC-WHMA#PBF vs LTP5900IPC-WHMA#PBF Vergleich
Detaillierter Direktvergleich von LTP5902IPC-WHMA#PBF von Analog Devices und LTP5900IPC-WHMA#PBF von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
LTP5902IPC-WHMA#PBF - 802.15.4 WirelessHART Mote Module | ADI
LTP5902IPC-WHMA#PBF ✓ AktivAnalog Devices
LTP5900IPC-WHMA#PBF - SmartMesh WirelessHART Mote 2.4GHz | ADI
LTP5900IPC-WHMA#PBF ✓ AktivSpezifikationsvergleich
| Parameter | LTP5902IPC-WHMA#PBF | LTP5900IPC-WHMA#PBF |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | RF Modules | RF Modules |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $32,50 | $35,60 |
| Manufacturer | Analog Devices Inc. | — |
| Series | Dust Networks, SmartMesh, WirelessHART | — |
| RF Family/Standard | 802.15.4 / WirelessHART (IEC 62591) | — |
| Protocol | SmartMesh WirelessHART | — |
| Frequency Band | 2.4 GHz ISM (2.4000 GHz to 2.4835 GHz) | — |
| Maximum RF Output Power | 8 dBm | — |
| Over-the-Air Data Rate | 250 kbps | — |
| Antenna Connector | MMCX (antenna not included) | — |
| Antenna Type | Not Included | — |
| Montageart | Surface Mount | — |
| Transmit Current | 5.4 mA to 9.7 mA (depending on output power) | — |
| Receive Current | 4.5 mA | — |
| Host Interface | SPI | — |
| Betriebstemperaturbereich | -40 C to +85 C | — |
| MSL-Level | 3 (168 Hours) | — |
| Gehäuse | PCB Module (66 lead), Tray | 22-pin through-hole module (Tray) |
| Product Status | Active | — |
| Compliance | RoHS (lead-free #PBF suffix) | — |
| Product Type | — | Wireless Mote Module (WirelessHART) |
| Manufacturer Family | — | Eterna (SmartMesh WirelessHART) |
| Wireless Standard | — | IEEE 802.15.4 / WirelessHART (IEC 62591) |
| Operating Frequency | — | 2.4 GHz ISM (2400-2483.5 MHz) |
| Number of Channels | — | 16 |
| Center Frequency (per datasheet) | — | 2483.5 MHz |
| RF Data Rate | — | 250 kbps |
| TX Output Power | — | Up to 8 dBm |
| RX Sensitivity | — | -95 dBm (typical) |
| Modulation | — | O-QPSK (IEEE 802.15.4 DSSS) |
| Antenna Interface | — | MMCX (antenna not included) |
| Microcontroller | — | ARM Cortex-M3 32-bit |
| Network Stack | — | Embedded Dust Networks SmartMesh WirelessHART |
| Encryption | — | AES-128 (link layer) |
| Versorgungsspannung | — | 2.1 V to 3.6 V DC |
| Betriebstemperatur | — | -40 °C to +85 °C (industrial) |
| Terminal Form | — | Through-Hole |
| Number of Terminals | — | 22 |
| Package Shape | — | Rectangular PCB module |
| Montagestil | — | Through Hole |
| Radio Certifications | — | FCC, IC, ETSI, Telec, ARIB |
| RoHS-Status | — | Compliant (PBF suffix indicates lead-free) |