MAX1069AEUD+T vs LTC2309IF Vergleich
Detaillierter Direktvergleich von MAX1069AEUD+T von Analog Devices und LTC2309IF von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MAX1069AEUD+T | LTC2309IF |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,78 | $9,50 |
| Auflösung | 14 bits | 12 bit |
| Abtastrate | 58.6 ksps | — |
| Architecture | SAR (Successive Approximation) | SAR (Successive Approximation Register) |
| Number of Input Channels | 1 single-ended | 8 single-ended / 4 differential |
| Input Type | Single-ended analog input | — |
| Analog Supply Voltage | +2.7 V to +5.25 V | — |
| Digital Supply Voltage | [DATA_NEEDED: digital supply range] | — |
| Internal Reference Voltage | +4.096 V | — |
| External Reference Support | [DATA_NEEDED: external REF input range] | — |
| Serial Interface | I2C-compatible 2-wire (Fast-mode and High-speed mode) | — |
| I2C Address Pins | ADD0-ADD3 (up to 16 devices on one bus) | — |
| On-Chip Clock | 4 MHz internal | — |
| Power-Down Mode | Automatic between conversions | — |
| Gehäuse | 14-pin TSSOP | 20-TSSOP (FE) |
| Betriebstemperaturbereich | [DATA_NEEDED: temperature grade] | — |
| Montageart | Surface Mount | — |
| RoHS-Status | Compliant | Compliant (PBF suffix) |
| Lead-Free | Yes | — |
| Conversion Time | — | 1.3 us per channel (typical) |
| Throughput Rate | — | up to 500 ksps (datasheet-dependent) |
| Supply Voltage (VDD) | — | 5 V single supply |
| Versorgungsstrom | — | 300 uA at 1 ksps (typical) |
| Digital Interface | — | I2C-compatible, standard / fast / high-speed modes |
| I2C Address Selection | — | 2 pins (AD0, AD1) - up to 4 devices on one bus |
| Internal Reference | — | 2.5 V, 10 ppm/C typical drift |
| External Reference Input (REFIN) | — | Yes, supports ratiometric operation |
| Sample-and-Hold | — | Fully differential, common-mode noise rejection |
| Analog Input Range | — | 0 V to VDD (unipolar); +/-VREF differential |
| Operating Temperature Range (I grade) | — | -40 C to +85 C |
| Abschaltstrom | — | Nap / I2C power-down supported |