MAX1231ACEG+ vs MAX1231ACEG+T Vergleich
Detaillierter Direktvergleich von MAX1231ACEG+ von Maxim Integrated und MAX1231ACEG+T von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Maxim Integrated
MAX1231ACEG+ - 12-Bit 300ksps 16-Ch SAR ADC | Maxim Integrated
MAX1231ACEG+ ✓ Aktiv
Spezifikationsvergleich
| Parameter | MAX1231ACEG+ | MAX1231ACEG+T |
|---|---|---|
| Marke | Maxim Integrated | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,37 | $4,65 |
| Auflösung | 12 bit | 12 bit |
| Sample Rate | 300 ksps | — |
| Number of Input Channels | 8 / 16 (selectable) | 8 or 16 single-ended (4 or 8 differential) |
| Input Configuration | Single-ended / pseudo-differential | — |
| Conversion Architecture | SAR (Successive Approximation) | — |
| Analog Supply Voltage (AVDD) | 3.0 V to 3.6 V | — |
| Digital Supply Voltage (DVDD) | 2.7 V to VAVDD | — |
| Versorgungsstrom | [DATA_NEEDED: AVDD + DVDD current] | — |
| Internal Reference | 2.5 V | — |
| External Reference Range | 1.0 V to AVDD | 1.0 V to VDD |
| Integral Nonlinearity (INL) | ±1 LSB (max) | — |
| Differential Nonlinearity (DNL) | ±1 LSB (max, no missing codes) | — |
| Signal-to-Noise + Distortion (SINAD) | [DATA_NEEDED: SINAD at 100 kHz input] | — |
| Internal FIFO Depth | 16 conversions | — |
| Interner Temperatursensor | Yes (±1 °C typical accuracy) | — |
| Serial Interface | SPI / QSPI / MICROWIRE-compatible | — |
| Maximum SCLK Frequency | 10 MHz | — |
| Input Fault Tolerance | ±6 V (clamped, no latch-up) | — |
| Gehäuse | 24-QSOP (EG) | 24-pin QSOP |
| Betriebstemperaturbereich | 0 °C to +70 °C (commercial, C grade) | 0 °C to +70 °C (commercial, C-grade) |
| Montageart | Surface Mount | Surface Mount |
| MSL Sensitivity Level | [DATA_NEEDED: MSL level] | — |
| RoHS-Status | Compliant | Compliant |
| Abtastrate | — | 300 ksps |
| Architecture | — | SAR (Successive Approximation Register) |
| Input Type | — | Single-Ended / Differential (software configurable) |
| Data Interface | — | SPI / QSPI / MICROWIRE-compatible serial |
| Versorgungsspannung | — | 3 V or 3.3 V nominal |
| Supply Current (operating, 300 ksps) | — | 1.6 mA (typ) |
| Internal Reference Voltage | — | 2.5 V (A-grade) |
| Eingangsspannungsbereich | — | 0 to VREF / ±VREF / 0 to 2×VREF / ±2×VREF |
| Internal FIFO | — | 16 entries |
| Internal Temperature Sensor Accuracy | — | ±1 °C |
| Linearity Error (INL) | — | ±1 LSB (max) |