MAX1400EAI vs MAX1402EAI+W Vergleich
Detaillierter Direktvergleich von MAX1400EAI von Analog Devices und MAX1402EAI+W von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MAX1400EAI | MAX1402EAI+W |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $14,20 | $13,85 |
| Auflösung | 18 bit | 18 bits |
| Number of Input Channels | 3 differential / 5 single-ended | — |
| Converter Architecture | Sigma-Delta (oversampling) | — |
| Effective Accuracy | 16 bit at 480 sps output data rate | — |
| Maximum Output Data Rate | [DATA_NEEDED: maximum data rate in sps] | — |
| Versorgungsspannung | +5 V single supply | +5 V nominal |
| Operating Supply Current | 1.7 mA typical | — |
| Schnittstelle | SPI/QSPI/MICROWIRE-compatible serial | SPI / QSPI / MICROWIRE-compatible serial |
| On-chip PGA Gain Range | 1 to 128 | — |
| Programmable Excitation Current Sources | Yes (sensor excitation) | — |
| On-chip Calibration | Yes (offset and gain) | — |
| On-chip Oscillator | Yes | — |
| On-chip Digital Comparator | Yes | — |
| Gehäuse | 28-SSOP (5.30 mm body width, 0.65 mm pitch) | 28-pin SSOP (EAI) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 C to +85 C (E grade) | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| No-Missing-Code Accuracy | — | 16 bits at 480 sps |
| Output Data Rate (max) | — | 480 sps |
| Output Data Rate (programmable) | — | 60 sps to 480 sps |
| Analog Inputs | — | 3 differential / pseudo-differential channels |
| PGA Gain Range | — | 1 to 128 |
| On-Chip Current Sources | — | 2 x 200 µA matched |
| Quiescent Current (operating) | — | 250 µA typ |
| Quiescent Current (power-down) | — | 2 µA typ |
| Architecture | — | Sigma-delta modulator + SINC3 decimation filter |
| Betriebstemperatur | — | -40 °C to +85 °C |
| MSL-Level | — | 1 (per JEDEC J-STD-020) |