MAX14852GWE+ vs MAX14850ASE+ Vergleich
Detaillierter Direktvergleich von MAX14852GWE+ von Analog Devices und MAX14850ASE+ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
MAX14852GWE+ - 2.75kV Isolated RS-485/RS-422 Transceiver | Maxim Integrated
MAX14852GWE+ ✓ AktivAnalog Devices
MAX14850ASE+ - 6-Channel 600Vrms Digital Isolator | Analog Devices
MAX14850ASE+ ✓ AktivSpezifikationsvergleich
| Parameter | MAX14852GWE+ | MAX14850ASE+ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $7,25 | $2,41 |
| Funktion | Transceiver | Six-Channel Digital Isolator |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Data Rate (low-speed mode) | 500 kbps | — |
| Data Rate (high-speed mode) | 25 Mbps | — |
| Galvanic Isolation Rating | 2.75 kVRMS (60 s) | — |
| Supply Voltage (VVDD / VBUS) | 1.71 V to 5.5 V | — |
| ESD Protection (HBM, bus pins) | ±35 kV | — |
| Betriebstemperatur | -40 °C to +105 °C | — |
| Gehäuse | 16-pin WSOIC (7.50 mm body width) | 16-SOIC (NSOIC, 0.154", 3.90 mm width) |
| Montageart | Surface Mount | Surface Mount |
| Fail-safe Receiver | Yes | — |
| Hot-swap Tolerant | Yes | — |
| RoHS-Status | Compliant | Compliant |
| Isolation Technology | Maxim iso-loop (integrated transformer driver) | — |
| Part Number | — | MAX14850ASE+ |
| Manufacturer | — | Analog Devices / Maxim Integrated |
| Number of Channels | — | 6 (3 forward / 3 reverse) |
| Isolation Voltage (RMS) | — | 600 Vrms |
| Surge Withstand | — | 2.5 kVrms |
| Common-Mode Transient Immunity (CMTI) | — | 1.5 kV/us (min), 25 kV/us (typ) |
| Maximum Data Rate | — | 50 Mbps |
| Minimum Data Rate (DC) | — | 2 Mbps |
| Propagation Delay | — | 30 ns (typical) |
| Supply Voltage (VDD1, VDD2) | — | 3 V to 5.5 V |
| Supply Current per Channel (typ) | — | 2.5 mA at 1 Mbps |
| Betriebstemperaturbereich | — | -40 C to +105 C |
| Pin-Anzahl | — | 16 |
| MSL-Level | — | 1 |