MAX150AEWP+ vs MAX150AEWP+T Vergleich
Detaillierter Direktvergleich von MAX150AEWP+ von Maxim Integrated und MAX150AEWP+T von Maxim Integrated. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Maxim Integrated
MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated
MAX150AEWP+T ✓ AktivSpezifikationsvergleich
| Parameter | MAX150AEWP+ | MAX150AEWP+T |
|---|---|---|
| Marke | Maxim Integrated | Maxim Integrated |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,07 | $5,78 |
| Manufacturer | Maxim Integrated (Analog Devices) | — |
| Part Number | MAX150AEWP+ | — |
| Funktion | 8-Bit Analog-to-Digital Converter (ADC) | — |
| Architecture | Half-Flash (Two-Step Flash) | — |
| Auflösung | 8 bits (256 codes) | 8 bit |
| Conversion Time | 1.34 µs (typical) | — |
| Conversion Rate | [DATA_NEEDED: max sample rate in ksps] | — |
| Analog Supply Voltage | +5 V (single supply) | — |
| Digital Supply Voltage | +5 V (single supply, TTL-compatible I/O) | — |
| On-Chip Reference | +2.5 V bandgap | — |
| Track/Hold Amplifier | Internal, integrated | — |
| Number of Channels | 1 single-ended input | 1 single-ended input |
| Eingangsspannungsbereich | 0 V to +5 V (unipolar, with internal reference) | — |
| Digital Output Interface | Three-state latching bus, 8080/6800 µP-compatible | — |
| Betriebstemperaturbereich | 0 °C to +70 °C (commercial, EWP suffix) | -40 C to +85 C |
| Gehäuse | 20-pin SO (SOIC-20), gull-wing | 20-pin Wide-Body SOIC (EWP) |
| Montageart | Surface Mount | Surface Mount (Tape & Reel) |
| RoHS-Status | Compliant (+ suffix indicates RoHS-compliant) | Compliant |
| Lead-Free | Yes | — |
| Screening Level | Commercial | — |
| ADC Architecture | — | Half-flash (two-step) with track-and-hold |
| Conversion Time (typ) | — | 1.34 us |
| Maximum Sample Rate | — | approx. 500 ksps |
| Analog Input Range | — | 0 V to +5 V (unipolar) |
| Referenzspannung | — | Internal 2.5 V (external overdrive supported) |
| Analog Supply (AVCC) | — | +5 V nominal |
| Digital Supply (DVCC) | — | +5 V nominal |
| Typical Power Dissipation | — | 35 mW (analog) + 40 mW (digital) |
| Output Interface | — | Parallel 8-bit, three-state, microprocessor-compatible |
| Input Track-and-Hold Acquisition | — | approx. 100 ns to 0.01% accuracy |