MAX152CWP vs MAX150AEWP+T Vergleich
Detaillierter Direktvergleich von MAX152CWP von Maxim Integrated und MAX150AEWP+T von Maxim Integrated. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Maxim Integrated
MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated
MAX150AEWP+T ✓ AktivSpezifikationsvergleich
| Parameter | MAX152CWP | MAX150AEWP+T |
|---|---|---|
| Marke | Maxim Integrated | Maxim Integrated |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,05 | $5,78 |
| Auflösung | 8 bits | 8 bit |
| Number of Input Channels | 1 (single-ended analog input; internal 8:1 multiplexer available on related parts) | — |
| Conversion Architecture | Half-flash (sub-ranging flash) | — |
| Conversion Time | 1.8 us | — |
| Throughput / Sample Rate | 400 ksps | — |
| Eingangsspannungsbereich | 0 V to VREF | — |
| Supply Voltage (Single Supply) | +2.7 V to +3.6 V (+3V nominal) | — |
| Operating Current (Active) | 1.5 mA typical | — |
| Power-Down Current | 1 uA typical | — |
| Wake-Up Time from Power-Down | 900 ns | — |
| Full-Power Analog Input Bandwidth | 300 kHz | — |
| Internal Track/Hold | Yes (integrated) | — |
| Referenzspannung | Internal or external (ratiometric mode available, VREF = VCC) | Internal 2.5 V (external overdrive supported) |
| Schnittstelle | Microprocessor-compatible parallel (8-bit data bus) | — |
| Gehäuse | 20-pin SOIC wide-body (WP), 7.5 mm body width | 20-pin Wide-Body SOIC (EWP) |
| Betriebstemperaturbereich | 0C to +70C (commercial) | -40 C to +85 C |
| Montageart | Surface Mount | Surface Mount (Tape & Reel) |
| RoHS-Status | [DATA_NEEDED: RoHS status - check manufacturer declaration] | Compliant |
| ADC Architecture | — | Half-flash (two-step) with track-and-hold |
| Number of Channels | — | 1 single-ended input |
| Conversion Time (typ) | — | 1.34 us |
| Maximum Sample Rate | — | approx. 500 ksps |
| Analog Input Range | — | 0 V to +5 V (unipolar) |
| Analog Supply (AVCC) | — | +5 V nominal |
| Digital Supply (DVCC) | — | +5 V nominal |
| Typical Power Dissipation | — | 35 mW (analog) + 40 mW (digital) |
| Output Interface | — | Parallel 8-bit, three-state, microprocessor-compatible |
| Input Track-and-Hold Acquisition | — | approx. 100 ns to 0.01% accuracy |