MAX211IDB vs LT1039CJ Vergleich
Detaillierter Direktvergleich von MAX211IDB von Texas Instruments und LT1039CJ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MAX211IDB | LT1039CJ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Unknown |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,41 | $10,99 |
| Product Type | RS-232 Line Driver/Receiver (Transceiver) | Triple EIA-232 line transceiver |
| Number of Drivers | 4 | 3 |
| Number of Receivers | 5 | 3 |
| Supply Voltage (VCC) | 4.5 V to 5.5 V | — |
| Data Rate (Max) | 120 kbps | — |
| Driver Output Swing | ±9 V (typ) | — |
| ESD Protection (HBM, RS-232 pins) | ±15 kV | — |
| Supply Current (typ, no load) | 1.5 mA | — |
| Betriebstemperaturbereich | -40 °C to +85 °C | — |
| Charge Pump Caps | 4 external 0.1 µF | — |
| Receiver Input Threshold | 0.8 V (low) / 2.4 V (high) | — |
| Receiver Hysteresis | 0.5 V (typ) | — |
| Gehäuse | SSOP-28 (DB) | 18-pin DIP |
| Montageart | Surface Mount | Through-hole |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Standards Compliance | TIA/EIA-232-F | — |
| Input Logic Compatibility | TTL/CMOS | — |
| Versorgungsspannung | — | Up to ±15 V |
| Receiver Input Voltage | — | ±30 V |
| Driver Output Voltage | — | RS-232 levels; outputs can be driven to ±30 V without damage |
| Receiver Input Impedance | — | 30 kΩ nominal |
| Receiver Input Hysteresis | — | 0.4 V |
| Shutdown Output State | — | High impedance |
| Power-Off Output State | — | High impedance when V+ and V− are 0 V |
| Driver Logic Input | — | TTL logic input |
| Receiver Logic Output | — | TTL or CMOS compatible |
| Short Circuit Protection | — | Fully short-circuit protected outputs |
| Temperature Grade | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Supplier Case | — | DIP18 |