MAX232EEPE+ vs MAX232ECPE+ Vergleich
Detaillierter Direktvergleich von MAX232EEPE+ von Analog Devices und MAX232ECPE+ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MAX232EEPE+ | MAX232ECPE+ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-232 transceiver | — |
| Versorgungsspannung | 5 V | — |
| Transmitter Count | 2 | — |
| Receiver Count | 2 | — |
| Maximum Data Rate | 120 kbps | 120kbps |
| ESD Protection | 15 kV | 15kV HBM |
| Interface Standard | EIA/TIA-232E and CCITT V.28 | — |
| Gehäuse | 16-pin PDIP | 16-pin PDIP, 0.300 inch, 7.62mm |
| Pin-Anzahl | 16 pins | — |
| Montageart | Through-hole DIP | Through-hole |
| Logic Compatibility | TTL/CMOS-compatible RS-232 interface | TTL/CMOS interface |
| Power-Supply Topology | Single 5 V supply with integrated RS-232 charge-pump voltage generation | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | [DATA_NEEDED: typical and maximum supply current] | — |
| Transmitter Output Levels | [DATA_NEEDED: RS-232 output voltage levels] | — |
| Receiver Input Threshold | [DATA_NEEDED: receiver threshold and hysteresis] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Device Type | — | Dual RS-232 transceiver |
| Transmit Channels | — | 2 |
| Receive Channels | — | 2 |
| Supply Voltage Range | — | 4.5V to 5.5V |
| Supported Standards | — | EIA/TIA-232E and CCITT V.28 |
| Charge Pump | — | Integrated charge-pump circuitry |
| Negative Supply Requirement | — | No separate negative supply; external capacitors required |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Voltage Range | — | [DATA_NEEDED: RS-232 receiver input voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current] |
| External Charge-Pump Capacitors | — | [DATA_NEEDED: charge-pump capacitor values] |
| AEC-Q100 Qualification | — | not_applicable |