MAX232EEWE+T vs MAX232ECDWR Vergleich
Detaillierter Direktvergleich von MAX232EEWE+T von Analog Devices und MAX232ECDWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MAX232ECDWR - Dual 250kbps RS-232 Transceiver | Texas Instruments
MAX232ECDWR ✓ AktivSpezifikationsvergleich
| Parameter | MAX232EEWE+T | MAX232ECDWR |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-232 transceiver (2 drivers and 2 receivers) | Dual RS-232 driver/receiver |
| Driver Count | 2 channels | — |
| Receiver Count | 2 channels | — |
| Duplex Mode | Full duplex | — |
| Versorgungsspannung | 5 V | — |
| Maximum Data Rate | 120 kbps | 250 kbps |
| ESD Protection | ±15 kV HBM | — |
| RS-232 Compliance | EIA/TIA-232E | — |
| V.28 Compliance | CCITT V.28 | — |
| Voltage Generation | On-chip charge-pump circuitry | — |
| Gehäuse | 16-pin wide SOIC, 7.50 mm width | 16-pin SOIC (DW), 0.295 inch / 7.50 mm width |
| Pin-Anzahl | 16 pins | — |
| Montageart | Surface-mount SMD | Surface mount |
| Shipping Format | Tape and reel | — |
| Operating Voltage | [DATA_NEEDED: operating voltage range] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Transmitters | — | 2 |
| Number of Receivers | — | 2 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Supply Type | — | Single 5 V supply |
| ESD Protection Standard | — | IEC 61000-4-2 |
| Transmitter Output Type | — | RS-232 line driver |
| Receiver Output Type | — | TTL/CMOS logic-level receiver |
| Charge-Pump Architecture | — | Capacitive voltage generator with external capacitors |
| Number of External Charge-Pump Capacitors | — | 4 |
| Bypass Capacitor Connection | — | 1 external capacitor pin |
| Input Logic Levels | — | [DATA_NEEDED: receiver input logic thresholds] |
| RS-232 Common-Mode Voltage Range | — | [DATA_NEEDED: RS-232 common-mode voltage range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |