MAX3076EESD+T vs ISL83072EIUZA Vergleich
Detaillierter Direktvergleich von MAX3076EESD+T von Analog Devices und ISL83072EIUZA von Renesas Electronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Renesas Electronics
ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas
ISL83072EIUZA ✓ AktivSpezifikationsvergleich
| Parameter | MAX3076EESD+T | ISL83072EIUZA |
|---|---|---|
| Marke | Analog Devices | Renesas Electronics |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $1,45 |
| Product Type | RS-485/RS-422 transceiver | — |
| Supply Voltage Range | 2.97 V to 3.63 V | — |
| Maximum Data Rate | 16 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| ESD Protection | ±15 kV | — |
| Fail-Safe Receiver | Yes; logic-high output when receiver inputs are open or shorted | — |
| Hot-Swap Support | Yes | — |
| Interface Standards | RS-485 and RS-422 | — |
| Gehäuse | 14-pin narrow SOIC, 3.90 mm width | 8-MSOP |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C (industrial) |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Driver Output Protection | [DATA_NEEDED: driver output protection details] | — |
| Versorgungsstrom | [DATA_NEEDED: operating supply current] | — |
| RoHS-Status | unknown | Compliant |
| AEC-Q100 Qualification | not_applicable | — |
| Funktion | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Datenrate | — | 500 kbps (slew-rate limited, per family) |
| Versorgungsspannung | — | 3.0 V to 3.6 V (single 3.3V supply) |
| Bus ESD Protection (HBM) | — | ±15 kV (RS-485 bus pins) |
| Other-Pin ESD (HBM) | — | >7 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Receiver Fail-Safe | — | Full fail-safe (open, short, terminated, floating) |
| Hot Plug Tolerant | — | Yes (Tx/Rx remain three-state during power-up on versions with enable pins) |