MAX3095CSE+ vs MAX3097EESE+ Vergleich
Detaillierter Direktvergleich von MAX3095CSE+ von Analog Devices und MAX3097EESE+ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
MAX3095CSE+ - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices
MAX3095CSE+ ✓ AktivAnalog Devices
MAX3097EESE+ - Triple 32Mbps RS-422/RS-485 Receiver | Analog Devices
MAX3097EESE+ ✓ AktivSpezifikationsvergleich
| Parameter | MAX3095CSE+ | MAX3097EESE+ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Receiver Channels | 4 channels | — |
| Supported Standards | RS-422 and RS-485 receiver operation | RS-422 and RS-485 |
| Maximum Data Rate | 10 Mbps | 32 Mbps |
| Versorgungsspannung | +5 V | — |
| Input ESD Protection, Human Body Model | ±15 kV | — |
| Input ESD Protection, Air-Gap Discharge | ±15 kV | — |
| Input ESD Protection, Contact Discharge | ±8 kV | — |
| Gehäuse | 16-SOIC | — |
| Montageart | Surface mount | Surface mount |
| Product Type | Quad differential line receiver | RS-422/RS-485 interface receiver |
| ESD Protection Location | All receiver inputs | — |
| Application Category | RS-422/RS-485/RS-423 bus receiver | — |
| Level Translation | Receiver interface application | — |
| Telecommunications Suitability | Telecommunications equipment application listed by manufacturer | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Logic Levels | [DATA_NEEDED: output logic voltage levels] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Receiver Configuration | — | Triple receiver |
| Supply Voltage Range | — | 3 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| ESD Protection | — | ±15 kV |
| Fault Detection | — | Yes |
| Fault Outputs | — | Active push-pull fault-status outputs |
| Receiver Input Type | — | Differential RS-422/RS-485 input |
| Number of Channels | — | 3 |
| Betriebstemperatur | — | -40 C to +85 C |
| Package Type | — | 16-pin NSOIC |
| Package Technology | — | CMOS |
| Transient Protection | — | ±15 kV ESD-protected inputs |
| Supply Compatibility | — | 3 V/5 V operation |