MAX3221CPWRE4 vs MAX3221EIPWR Vergleich
Detaillierter Direktvergleich von MAX3221CPWRE4 von Texas Instruments und MAX3221EIPWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MAX3221CPWRE4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221CPWRE4 ✓ AktivTexas Instruments
MAX3221EIPWR - 250kbps Single RS-232 Transceiver | TI (Tape & Reel)
MAX3221EIPWR ✓ AktivSpezifikationsvergleich
| Parameter | MAX3221CPWRE4 | MAX3221EIPWR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | Single-channel RS-232 line driver/receiver | — |
| Supply Voltage Range | 3 V to 5.5 V | 3V to 5.5V |
| Maximum Data Rate | 250 kbit/s | 250kbps |
| Line Drivers | 1 | — |
| Line Receivers | 1 with dedicated enable pin | — |
| Charge-Pump Architecture | Dual charge-pump circuit | — |
| External Charge-Pump Capacitors | 0.1 µF | — |
| ESD Protection | ±15 kV pin-to-pin on serial-port connection pins, including GND | — |
| RS-232 Compliance | TIA/EIA-232-F | — |
| ITU Recommendation | ITU V.28 | — |
| Low Standby Current | 1 µA typical | — |
| Logic Input Compatibility | Accepts 5 V logic input with 3.3 V supply | — |
| Gehäuse | 16-pin TSSOP | 16-pin TSSOP |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Single-channel RS-232 line driver and receiver |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| RS-232 ESD Protection | — | ±15kV |
| ESD Standard | — | IEC 61000-4-2 |
| RS-232 Standard Compliance | — | TIA/EIA-232-F |
| Charge-Pump Capacitors Required | — | 4 external capacitors |
| Schnittstellentyp | — | Full RS-232 transceiver |
| Driver and Receiver Count | — | 1/1 transceiver |
| Shutdown and Enable Functions | — | [DATA_NEEDED: shutdown and enable pin functions] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |