MAX3221CPWRG4 vs MAX3221IPWRG4 Vergleich
Detaillierter Direktvergleich von MAX3221CPWRG4 von Texas Instruments und MAX3221IPWRG4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MAX3221CPWRG4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221CPWRG4 ✓ AktivSpezifikationsvergleich
| Parameter | MAX3221CPWRG4 | MAX3221IPWRG4 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Single-channel RS-232 line driver and receiver | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s | 250 kbps |
| Number of Drivers | 1 | 1 |
| Number of Receivers | 1 | 1 |
| Driver and Receiver Configuration | 1/1 full-duplex transceiver | — |
| ESD Protection | ±15 kV | ±15 kV HBM |
| RS-232 Standard | TIA/EIA-232-F | — |
| International Standard | ITU V.28 | — |
| Low Standby Current | 1 µA typical | — |
| External Charge-Pump Capacitors | 0.1 µF | 4 × 0.1 µF |
| Logic Input Compatibility | Accepts 5 V logic input with a 3.3 V supply | Accepts 5 V logic input with 3.3 V supply |
| Interchangeability | Designed to be interchangeable with equivalent devices | — |
| Gehäuse | 16-pin TSSOP, 4.40 mm width | 16-pin TSSOP |
| Montageart | Surface mount | Surface mount |
| RoHS-Status | RoHS compliant | [DATA_NEEDED: RoHS status] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | [DATA_NEEDED: active supply current] | — |
| Device Type | — | Single-channel RS-232 line driver/receiver |
| Receiver Enable | — | Dedicated enable pin |
| Standby Current | — | 1 µA typical |
| RS-232 Compliance | — | TIA/EIA-232-F |
| ITU Compliance | — | ITU V.28 |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| ESD Test Method | — | Human body model (HBM) |
| Charge-Pump Architecture | — | Dual charge-pump circuit |