MAX3485CSA+ vs MAX3485CSA+T Vergleich
Detaillierter Direktvergleich von MAX3485CSA+ von Maxim Integrated und MAX3485CSA+T von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MAX3485CSA+ | MAX3485CSA+T |
|---|---|---|
| Marke | Maxim Integrated | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Unknown | Aktiv |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 half-duplex transceiver |
| Versorgungsspannung | 3.3 V | — |
| Datenrate | 10 Mbps | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Supported Standards | RS-485 and RS-422 | RS-422 and RS-485 |
| Driver Feature | Slew-rate-limited driver family feature | — |
| Short-Circuit Protection | Short-circuit current limited driver | — |
| Thermisches Abschalten | Driver enters high-impedance state during thermal shutdown | — |
| Receiver Feature | Fail-safe receiver input | — |
| Gehäuse | 8-SOIC, 0.154 inch, 3.90 mm width | 8-pin SOIC (NSOIC-8) |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | 0C to +70C | [DATA_NEEDED: operating temperature range] |
| Channel Direction | 1 transmitter and 1 receiver | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | [DATA_NEEDED: ESD protection rating] |
| Receiver Input Common-Mode Range | [DATA_NEEDED: receiver input common-mode range] | — |
| Versorgungsstrom | [DATA_NEEDED: operating and quiescent supply current] | — |
| Logic Output Levels | [DATA_NEEDED: logic output voltage levels] | — |
| Termination Requirement | [DATA_NEEDED: termination and biasing requirements] | — |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Channels | — | 1 |
| Receiver Channels | — | 1 |
| Driver Edge Rate | — | Slew-rate limited |
| Driver Fault Protection | — | Short-circuit current limiting and thermal shutdown |
| Receiver Fail-Safe | — | Supported |
| Driver Output State During Thermal Shutdown | — | High impedance |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Standard Reel Quantity | — | [DATA_NEEDED: standard reel quantity] |