MAX485EPA+ vs SN75176 Vergleich
Detaillierter Direktvergleich von MAX485EPA+ von Analog Devices und SN75176 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ AktivSpezifikationsvergleich
| Parameter | MAX485EPA+ | SN75176 |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,80 | $0,55 |
| Product Type | RS-485/RS-422 transceiver | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Communication Mode | Half-duplex | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 2.5 Mbps | — |
| Slew Rate | Not limited | — |
| Driver Protection | Short-circuit current limited and protected | — |
| Gehäuse | 8-pin PDIP | 8-pin PDIP (P) |
| Montageart | Through-hole | Through-Hole |
| Interface Standards | RS-422 and RS-485 | — |
| Driver Output | Differential | — |
| Receiver Input | Differential | — |
| Power Class | Low-power transceiver | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Common-Mode Voltage | [DATA_NEEDED: common-mode voltage range] | — |
| ESD Protection | [DATA_NEEDED: ESD rating] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Funktion | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| Driver Output Current | — | ±60 mA (max) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |