MC9S08SE8VWL vs MK20DN128VMP5 Vergleich
Detaillierter Direktvergleich von MC9S08SE8VWL von NXP Semiconductors und MK20DN128VMP5 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MC9S08SE8VWL - 8-Bit S08 MCU, 8KB Flash, 20MHz, 28-SOIC | NXP
MC9S08SE8VWL ⚠ Letzte BestellmöglichkeitNXP Semiconductors
MK20DN128VMP5 - Kinetis K20 50MHz Cortex-M4 MCU, 128KB Flash | NXP
MK20DN128VMP5 ✓ AktivSpezifikationsvergleich
| Parameter | MC9S08SE8VWL | MK20DN128VMP5 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,34 | $5,20 |
| Core | S08 (HCS08) 8-bit CISC | — |
| Maximum CPU Frequency | 20 MHz | — |
| Program Flash Memory | 8 KB (8K x 8) | 128 KB (128K x 8) |
| RAM | 1 KB | — |
| EEPROM | 512 bytes | — |
| Operating Voltage | 2.7 V to 5.5 V | — |
| Supply Voltage (datasheet rating) | 3.3 V / 5 V dual-rail | — |
| ADC | 8-channel, 12-bit (10-bit mode) | 16-bit SAR, multiple channels |
| Timers (TPM) | 2 x 16-bit | — |
| Communication Interfaces | 1 x SCI (UART), 1 x SPI, 1 x I2C | UART, SPI, I2C, USB |
| GPIO | Up to 24 shared with peripherals | — |
| Gehäuse | 28-SOIC (W, wide-body) | 64-MAPBGA (5x5 mm) |
| Montageart | Surface Mount | Surface Mount (MAPBGA) |
| Betriebstemperatur | -40 C to +105 C (industrial) | — |
| Debug Interface | Background Debug Mode (BDM), single-wire | — |
| Low-Voltage Detect | Yes (LVD module) | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | MSL3 (JEDEC J-STD-020) | 3 (per JEDEC J-STD-020) |
| Core Architecture | — | ARM Cortex-M4 with FPU |
| Core Bit Width | — | 32-bit |
| Maximale Taktfrequenz | — | 50 MHz |
| SRAM | — | 16 KB |
| USB Controller | — | USB 2.0 Full-Speed Device/Host/OTG with on-chip transceiver |
| Versorgungsspannung | — | 1.8 V / 2.5 V / 3.3 V |
| Betriebstemperaturbereich | — | -40C to +105C (industrial) |
| Number of I/O Pins | — | [DATA_NEEDED: GPIO count] |
| DMA Channels | — | [DATA_NEEDED: DMA channel count] |
| Low-Power Modes | — | Run, Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLSx |
| Series / Sub-Family | — | Kinetis K20 (K20 Sub-Family, 50 MHz) |