MCP2551-I-SN vs SN65HVD230DR Vergleich
Detaillierter Direktvergleich von MCP2551-I-SN von Microchip Technology und SN65HVD230DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
MCP2551-I/SN - High-Speed CAN Transceiver, 1Mb/s, ISO-11898 | Microchip
MCP2551-I-SN ⚠ Letzte BestellmöglichkeitTexas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ AktivSpezifikationsvergleich
| Parameter | MCP2551-I-SN | SN65HVD230DR |
|---|---|---|
| Marke | Microchip Technology | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,71 | $0,94 |
| Funktion | High-Speed CAN Transceiver | — |
| Protocol | CANbus (ISO-11898) | CANbus (ISO 11898-2) |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Data Rate (max) | 1 Mb/s | — |
| Versorgungsspannung | 4.5 V to 5.5 V | 3 V to 3.6 V (3.3 V nominal) |
| Common-Mode Range | -2 V to +7 V (typical ISO-11898-2) | — |
| Betriebstemperatur | -40 C to +125 C (Industrial, I grade) | -40C to +85C |
| Gehäuse | 8-pin SOIC (SN, 0.154" / 3.90 mm width) | 8-SOIC (D) |
| Montageart | Surface Mount | Surface Mount |
| Slope Control | Yes (RS pin, externally adjustable) | — |
| Standby Mode | Yes (low-current via Rs pin) | — |
| VREF Output | Yes (approx. VDD/2) | — |
| Bus Dominant Fault Detection | Yes (automatic receiver-only mode) | — |
| ESD Protection (CAN bus pins) | [DATA_NEEDED: HBM/CDM ESD rating] | — |
| MSL-Level | 1 (per JEDEC J-STD-020, not explicitly stated in source) | — |
| Product Type | — | CAN Bus Transceiver |
| Maximum Data Rate | — | 1 Mbps |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| RoHS-Status | — | Compliant |
| RS Pin Function | — | Slew-rate control via external resistor |