MK20DN128VMP5 vs MC9S08SE8VWL Vergleich
Detaillierter Direktvergleich von MK20DN128VMP5 von NXP Semiconductors und MC9S08SE8VWL von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MK20DN128VMP5 - Kinetis K20 50MHz Cortex-M4 MCU, 128KB Flash | NXP
MK20DN128VMP5 ✓ AktivNXP Semiconductors
MC9S08SE8VWL - 8-Bit S08 MCU, 8KB Flash, 20MHz, 28-SOIC | NXP
MC9S08SE8VWL ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | MK20DN128VMP5 | MC9S08SE8VWL |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Letzte Kaufgelegenheit |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,20 | $2,34 |
| Core Architecture | ARM Cortex-M4 with FPU | — |
| Core Bit Width | 32-bit | — |
| Maximale Taktfrequenz | 50 MHz | — |
| Program Flash Memory | 128 KB (128K x 8) | 8 KB (8K x 8) |
| SRAM | 16 KB | — |
| Gehäuse | 64-MAPBGA (5x5 mm) | 28-SOIC (W, wide-body) |
| USB Controller | USB 2.0 Full-Speed Device/Host/OTG with on-chip transceiver | — |
| ADC | 16-bit SAR, multiple channels | 8-channel, 12-bit (10-bit mode) |
| Versorgungsspannung | 1.8 V / 2.5 V / 3.3 V | — |
| Betriebstemperaturbereich | -40C to +105C (industrial) | — |
| Montageart | Surface Mount (MAPBGA) | Surface Mount |
| Number of I/O Pins | [DATA_NEEDED: GPIO count] | — |
| DMA Channels | [DATA_NEEDED: DMA channel count] | — |
| Communication Interfaces | UART, SPI, I2C, USB | 1 x SCI (UART), 1 x SPI, 1 x I2C |
| Low-Power Modes | Run, Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLSx | — |
| Series / Sub-Family | Kinetis K20 (K20 Sub-Family, 50 MHz) | — |
| MSL-Level | 3 (per JEDEC J-STD-020) | MSL3 (JEDEC J-STD-020) |
| RoHS-Status | Compliant | Compliant |
| Core | — | S08 (HCS08) 8-bit CISC |
| Maximum CPU Frequency | — | 20 MHz |
| RAM | — | 1 KB |
| EEPROM | — | 512 bytes |
| Operating Voltage | — | 2.7 V to 5.5 V |
| Supply Voltage (datasheet rating) | — | 3.3 V / 5 V dual-rail |
| Timers (TPM) | — | 2 x 16-bit |
| GPIO | — | Up to 24 shared with peripherals |
| Betriebstemperatur | — | -40 C to +105 C (industrial) |
| Debug Interface | — | Background Debug Mode (BDM), single-wire |
| Low-Voltage Detect | — | Yes (LVD module) |