MK24FN1M0VLL12 vs MK64FN1M0VLL12 Vergleich
Detaillierter Direktvergleich von MK24FN1M0VLL12 von NXP Semiconductors und MK64FN1M0VLL12 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12 ✓ AktivSpezifikationsvergleich
| Parameter | MK24FN1M0VLL12 | MK64FN1M0VLL12 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,95 | $7,95 |
| Core Architecture | ARM Cortex-M4F with FPU and DSP | — |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Flash Memory | 1 MB | — |
| SRAM | 256 KB | — |
| Supply Voltage Range | 1.71 V to 3.6 V | — |
| Betriebstemperaturbereich | -40C to +105C | -40 C to +105 C (industrial) |
| Gehäuse | 100-LQFP (LL) | — |
| Pin-Anzahl | 100 | — |
| GPIO Count | Up to 80 | — |
| USB Controller | USB 2.0 OTG Full-Speed (Device/Host/OTG) | — |
| CAN | 2 x FlexCAN | — |
| ADC | 16-bit SAR ADC | 16-bit SAR, up to 2x 16-ch (peripherals vary by die) |
| Operating Voltage | 1.8 V / 2.5 V / 3.3 V | — |
| Run Current | 250 uA/MHz (typical) | — |
| Stop Current | < 340 nA | — |
| Wake-Up Time from Stop | 4.5 us | — |
| Low-Leakage Wake-Up Unit | Yes | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL Level] | 3 (per JEDEC J-STD-020) |
| RoHS-Status | Compliant | Compliant |
| Manufacturer | — | NXP Semiconductors |
| Series | — | Kinetis K64 |
| Core Processor | — | ARM Cortex-M4F (with FPU and DSP) |
| Core Size | — | 32-bit |
| Program Memory Size | — | 1 MB (1M x 8) Flash |
| RAM Size | — | 256 KB SRAM |
| Flash Memory Type | — | FTFE - Non-Flex (4 KB sector, 8-byte phrase) |
| Supply Voltage (VDD) | — | 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V rails) |
| Gehäuse / Bauform | — | 100-LQFP, 14x14 mm, 0.5 mm pitch |
| USB | — | USB 2.0 Full-Speed OTG, on-chip FS transceiver |
| Ethernet | — | 10/100 Mbps MAC, MII / RMII interface |
| Hardware Cryptography | — | AES-128/256, DES/3DES, SHA-1/256, RSA, TRNG |
| DAC | — | 12-bit |
| GPIO | — | [DATA_NEEDED: GPIO count for this LQFP-100 mask] |
| Low-Power Modes | — | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS0/1/3 with RTC retention |