MK2732-06G vs MK2732-06GLF Vergleich
Detaillierter Direktvergleich von MK2732-06G von Renesas Electronics und MK2732-06GLF von Renesas Electronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MK2732-06G | MK2732-06GLF |
|---|---|---|
| Marke | Renesas Electronics | Renesas Electronics |
| Kategorie | Clock & Timing | Clock & Timing |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | PLL clock synthesizer and VCXO | Clock synthesizer and jitter cleaner |
| PLL | Yes, with bypass | — |
| Maximum Frequency | 54 MHz | — |
| Number of Circuits | 1 | — |
| Input | Crystal | — |
| Output | CMOS | — |
| Input-to-Output Ratio | 1:3 | — |
| VCXO Tuning Voltage Range | 0 V to 3 V | — |
| VCXO Frequency Variation | ±100 ppm | — |
| Minimum Pull Range | 200 ppm | — |
| Gehäuse | 16-pin TSSOP | — |
| Package Width | 4.40 mm (0.173 inch) | 0.173 inch (4.40 mm) |
| Montageart | Surface mount | — |
| Primary Application | xDSL chipsets | — |
| Additional Application | MPEG-2 decoders | — |
| Integrated Functions | VCXO, PLL, and multiplier | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Architecture | — | VCXO and PLL clock synthesizer |
| Versorgungsspannung | — | 4.75 V to 5.25 V |
| VCXO Control Voltage | — | 0 V to 3 V |
| Frequency Adjustment Range | — | ±100 ppm |
| Bus Interface | — | CMOS |
| Package Type | — | TSSOP-16, surface mount |
| Lead-Free Construction | — | Lead-free |
| Reference Frequency | — | [DATA_NEEDED: reference crystal frequency] |
| Output Frequency | — | [DATA_NEEDED: configured output frequency] |
| Ausgangskonfiguration | — | [DATA_NEEDED: output count and drive configuration] |
| Jitter Specification | — | [DATA_NEEDED: rms or peak-to-peak jitter] |
| Phase Noise | — | [DATA_NEEDED: phase-noise characterization] |
| PLL Divider Ratios | — | [DATA_NEEDED: programmable or selectable divider ratios] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |