MPC17531AEVEL vs MPC17529EVEL Vergleich
Detaillierter Direktvergleich von MPC17531AEVEL von NXP Semiconductors und MPC17529EVEL von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPC17531AEVEL - Dual 700mA H-Bridge Motor Driver 20-VMFP | NXP
MPC17531AEVEL ✓ AktivNXP Semiconductors
MPC17529EVEL - 0.7A Dual H-Bridge Motor Driver | NXP Semiconductors
MPC17529EVEL ✓ AktivSpezifikationsvergleich
| Parameter | MPC17531AEVEL | MPC17529EVEL |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,62 | $2,41 |
| Motor Type | Brushed DC / Stepper (2-phase) | — |
| Topologie | Dual H-Bridge | Bipolar, DMOS output stages |
| Anzahl der Ausgänge | 1 or 2 (dual H-bridge) | 2 (dual H-bridge) |
| Output Current (per channel) | 700 mA | — |
| Logic Supply Voltage (VCC) | 2.7 V to 3.6 V | 2.7 V to 5.6 V |
| Motor Load Supply (VM) | 2.0 V to 8.6 V | — |
| On-Resistance (Rds(on) per FET, typ.) | 0.5 ohm | — |
| Betriebstemperaturbereich | -20 C to +150 C (TJ) | -30 C to +85 C |
| Gehäuse | 20-VMFP (SSOP-style) | 20-VMFP (20-pin) |
| Montageart | Surface Mount | Surface Mount |
| Ausgangskonfiguration | Half-Bridge / Full-Bridge | — |
| Logic Input Compatibility | 3.0 V CMOS/TTL | — |
| PWM Capability | Up to 200 kHz | — |
| Enable Input | Yes | — |
| Sleep / Standby Current | [DATA_NEEDED: quiescent current in sleep mode] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Product Type | — | Dual H-Bridge Motor Driver |
| Load Supply Voltage (VM) | — | 2.0 V to 6.8 V |
| Continuous Output Current (per bridge) | — | 0.7 A |
| Continuous Output Current (parallel mode) | — | [DATA_NEEDED: paralleled current rating] |
| Logic Interface | — | 3.0 V / 5.0 V CMOS parallel |
| Built-in Charge Pump | — | Yes (internal, no external cap required) |
| Shoot-Through Protection | — | Yes |
| Undervoltage Lockout | — | Yes |
| Control Inputs | — | Parallel INx/ENx (no PWM) |