MPQ6411GS-Z vs MPQ6411GS-AEC1-Z Vergleich
Detaillierter Direktvergleich von MPQ6411GS-Z von Monolithic Power Systems und MPQ6411GS-AEC1-Z von Monolithic Power Systems. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Monolithic Power Systems
MPQ6411GS-Z - Windowed Watchdog Timer SOIC-8 | Monolithic Power Systems
MPQ6411GS-Z ✓ AktivMonolithic Power Systems
MPQ6411GS-AEC1-Z - Automotive Windowed Watchdog Timer, AEC-Q100 | MPS
MPQ6411GS-AEC1-Z ✓ AktivSpezifikationsvergleich
| Parameter | MPQ6411GS-Z | MPQ6411GS-AEC1-Z |
|---|---|---|
| Marke | Monolithic Power Systems | Monolithic Power Systems |
| Kategorie | Supervisors & Reset | Supervisors & Reset |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,95 | $1,18 |
| Funktion | Windowed Watchdog Timer Supervisor | Windowed Watchdog Timer |
| Number of Channels | 1 | — |
| Reset Output | Active-Low, Open-Drain | — |
| Watchdog Type | Windowed (upper + lower bound) | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 C to +125 C (AEC-Q100 Grade 1) |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range, V] | [DATA_NEEDED: VCC min/max V] |
| Ruhestrom | [DATA_NEEDED: Iq, uA] | [DATA_NEEDED: IQ in uA] |
| WDT Timing | Programmable via external capacitor | — |
| MODE Pin | Yes (window-select) | — |
| Gehäuse | SOIC-8 | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL rating] |
| RoHS-Status | Compliant | Compliant |
| AEC-Q100 Qualified (this variant) | No - standard grade | — |
| Output Topology | Open-Drain RESET | — |
| Number of Supervisors | — | 1 Channel |
| Reset Output Type | — | Open Drain / Open Collector (active low) |
| Automotive Qualification | — | AEC-Q100 Qualified |
| Gehäuse / Bauform | — | 8-SOIC (narrow body, 3.90 mm) |
| Packaging | — | Tape & Reel (Z suffix) |
| Trigger Input | — | WDI pin (watchdog input from MCU) |
| Mode Pin | — | Yes (selects windowed vs standard watchdog) |
| Power-On Reset | — | Yes (during VCC ramp-up) |
| Watchdog Window Timeout | — | [DATA_NEEDED: tWD window range] |
| Reset Pulse Width | — | [DATA_NEEDED: tRESET minimum] |