MPX2010GSX vs MPX2010DP Vergleich
Detaillierter Direktvergleich von MPX2010GSX von STMicroelectronics und MPX2010DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX2010GSX | MPX2010DP |
|---|---|---|
| Marke | STMicroelectronics | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,25 | $8,50 |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | — |
| Pressure Type | Vented Gauge | — |
| Ausgangstyp | Analog Voltage (ratiometric Wheatstone bridge) | Analog voltage, Wheatstone bridge (mV level) |
| Full-Scale Span (10 V Excitation) | 25 mV typical | — |
| Output Range | 0 mV to 25 mV at 10 V supply | — |
| Excitation Voltage | 10 V DC typical (5 V to 12 V compatible) | — |
| Sensitivity | 1.0 mV/kPa typical | — |
| Linearity | 0.45% typical (full-scale span) | ±0.05% (typ) |
| Temperature Compensation Range | 0°C to +85°C | — |
| Betriebstemperaturbereich | -40°C to +125°C | — |
| Port Style | Axial tube, 0.19" (4.92 mm) OD | — |
| Gehäuse | 4-SIP Module (through-hole) | — |
| Montageart | Through-Hole | — |
| Sensor Technology | Piezoresistive (silicon strain gauge) | — |
| Bridge Configuration | On-chip 4-resistor Wheatstone | — |
| RoHS-Status | Compliant | Compliant |
| Sensortyp | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Technology | — | Piezoresistive (silicon strain gauge bridge) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Versorgungsspannung | — | 10 V DC typical (max 16 V) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Betriebstemperatur | — | -40 °C to +125 °C |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |