MPX2100AP vs MPX2200A Vergleich

Detaillierter Direktvergleich von MPX2100AP von STMicroelectronics und MPX2200A von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Spezifikationsvergleich

Parameter MPX2100AP MPX2200A
Marke STMicroelectronics NXP Semiconductors
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $11,85 $9,13
Pressure Type Absolute Absolute
Operating Pressure Range 0 to 100 kPa (0 to 14.5 psi) 0 to 200 kPa (0 to 29.01 PSI)
Ausgangstyp Analog Voltage (Wheatstone bridge) Wheatstone Bridge (analog, mV)
Full-Scale Output Span 40 mV typical at 10 V excitation —
Offset (Zero Pressure) 0 mV typical —
Excitation Voltage 10 V DC typical —
Linearity ±0.25% (Full-Scale Span) —
Temperature Compensation On-chip, ±0.5% over 0°C to 85°C —
Betriebstemperaturbereich -40°C to +125°C —
Storage Temperature Range [DATA_NEEDED: storage temperature range] —
Port Style Axial Male Tube, 0.19 inch (4.93 mm) No port (single-side exposed)
Package Type 4-SIP Module —
Sensor Technology Silicon Piezoresistive —
Media Compatibility Dry gases (non-corrosive) —
Montageart Through-Hole (SIP) Through Hole, Board Mount
RoHS-Status [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status not in provided data]
MSL-Level [DATA_NEEDED: MSL moisture sensitivity level] —
Maximum Overpressure — 800 kPa (116.03 PSI)
Output Voltage Span — 0 mV to 40 mV (at 10 V excitation)
Sensitivity (nominal) — 0.2 mV/kPa
Supply Voltage (Excitation) — 10 V DC typical (max 16 V)
Accuracy — ±1% (typical)
Betriebstemperatur — -40 C to +125 C
Compensated Temperature Range — 0 C to +85 C
Gehäuse / Bauform — 4-SIP Module (through-hole, unibody)
Termination Style — PC Pin (through-hole)
Anzahl der Pins — 4
Technology — Silicon piezoresistive, on-chip temperature compensated

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern