MPX2202DP vs MPX2102DP Vergleich
Detaillierter Direktvergleich von MPX2202DP von NXP Semiconductors und MPX2102DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPX2102DP - 100kPa Differential Pressure Sensor, 4-SIP | NXP
MPX2102DP ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | MPX2202DP | MPX2102DP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Letzte Kaufgelegenheit |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $25,14 | $9,85 |
| Pressure Range | 0 to 200 kPa (0 to 29.01 PSI) | — |
| Pressure Type | Differential (dual port, tube inlet) | Differential (Dual Port) |
| Versorgungsspannung | 10 V typical | — |
| Full-Scale Span | 40 mV typical at 10 V supply | — |
| Offset | 0 mV typical | — |
| Linearity | 1.0% typical | [DATA_NEEDED: typical linearity %FS] |
| Pressure Hysteresis | 2.0% maximum | — |
| Temperature Compensated Range | 0 C to 85 C | — |
| Gehäuse / Bauform | 4-SIP Module (Case 867C) | 4-SIP Module (Unibody) |
| Port Type | Dual tube, male, 0.19" (4.93 mm) tube | — |
| Betriebstemperatur | -40 C to +125 C [DATA_NEEDED: confirm exact op-temp range from datasheet] | — |
| Ausgangstyp | Analog differential voltage | Analog Wheatstone Bridge (ratiometric mV) |
| Technology | Silicon piezoresistive, on-chip temperature compensated and calibrated | On-chip Temperature Compensated Silicon |
| Montageart | Through-hole (4-SIP tube inlet) | Through-Hole, Dual Vertical Port |
| RoHS-Status | RoHS compliant | — |
| Sensortyp | — | Piezoresistive Pressure Sensor |
| Operating Pressure Range | — | 0 kPa to 100 kPa (0 PSI to 14.5 PSI) |
| Full-Scale Output | — | 0 mV to 40 mV at 10 V excitation |
| Supply Voltage (Excitation) | — | 10 V typical (max specified separately) |
| Port Size | — | Male, 0.19" (4.93 mm) tube, Dual |
| Betriebstemperaturbereich | — | -40 °C to +125 °C |
| Compensated Temperature Range | — | 0 °C to +85 °C |
| Termination Style | — | Through-Hole PCB |
| Sensitivity | — | [DATA_NEEDED: mV/V typical] |
| Series | — | MPX2102 |